|
Gefran industrial PC and Gefran AC drives are used in the Extruder. In this system, the screw and barrel to control 37 KW AC drives, 1.5 KW AC for feeding material into the barrel of the material from the line to attract drivers and the 5.5 KW AC drives are used. All controls in the system are being carried out by Gefran industrial PC.
Number of the desired temperature in the machine area from making any changes in the program over the screen is easily adjusted. In this way, a single program package for a very comfortable way different extruder, depending on the customer's request through the screen can be adjusted. A lot of plastic extruder machines are obtained. Plastic water pipe, pen, sheet, etc.. products are produced. Heaters placed along the circumference of the barrel Exruderde temperature control PID control is performed with a precision of 0.1 degree centigrade incinerator. At the same time, pressure and temperature control in the hive is the starting point.
Screws in the hives of the AC drive to the desired temperature was brought back solution within the barrel along the lines of plastic raw materials will be provided. Lines according to the speed of the entire system is very sensitive way by ensuring synchronous, high-quality products are obtained at all speeds. Connected to the end of the plastic mold hive, takes the form of the desired pattern takes shape. For this product line as the hot water pools in which a controlled way is cooled by passing through. This material, found at the end of the line drawn through the attractive, the product automatically cut off the desired length is achieved
|
